Norwood Young America
Norwood Young America
Rockville
952-467-3100 Mon - Fri 8:00 - 5:00 301 Industrial Blvd, Norwood Young America, MN 55397
(320) 252 6272 Mon - Fri 8:00 - 5:00 24562 County Rd 138, St. Cloud, MN 56301
Lasting
Founded in 1971
Innovative
Designing & Engineering
Quality Equipment
Impervious
Building it for the Long Haul
Dietrich Tilling Systems

dietrich style tilling units for liquid manure toolbars

dietrich assemblies

Dietrich Series 70

cast steel chisel point sweep with front hi chrome casting

Features:

  • Attaches to a 4″ x 6″, 6″ x 6″ or 7″ x 7″ tool bar
  • No daily greasing – Only end of season shank pivot greasing
  • Snap pin adjust coulter – No set screws
  • 800# coulter down pressure spring assembly – Most others range from 200 – 350# down pressure
  • 22 – 1/2″ diameter coulter – Not 20″
  • Auto reset with heavy duty 1400# reset force – Not spring bundle
  • 1-1/4″ x 2″ edge bent steel shank – Not 1″ x 2″
  • Narrow 1/2″ sweep shank – Sweeps lift the soil less than 1-1/4″
  • Hi carbon, special bar quality, cast steel chisel point sweep with front hi chrome casting and heavy, abrasion-resistant hard surfacing on the wings
  • Separately replaceable sweeps & tubes
  • Cup washers protect all seals

Dietrich Slurry Clozr

premium unit for trouble-free performance

Features:

  • Clamps to shank for impoved residue flow
  • Vertically adjustable
  • Larger spindle than AA sealers
  • Spring for heavy down pressure to prevent bouncing
  • Square holes for carriage bolts to prevent rounding when adjusting
  • High tensile steel for durability
  • Substantial rock clearance
  • Grease zerks for rust prevention when not in use
  • Protection Collar around hub to keep grease around seal & water out

Complete Sweep/Rotary System

Designed for all Rates

Features:

  • Easy change over in the field between Sweep & Rotary Injection
  • 13 Wave Swivel Conical Bladeto widen slot for nutrient placement
  • Unique Swivel-mounted Conical Coulter Blade enters the soil parallel to the direction of travel and exits moving soil laterally resulting in maximum depth penetration for maximum gallons per acre. Does not create excesive side load on mounting or tank.
  • Individual depth adjustment
  • Option to run Coulters deeper behind tank tires in muddy conditions

Rotary

New & Improved

Features:

  • Spacing from 30″ to 18″
  • Fits 6″ x 4″ & 6″ x 6″ Tool Bar
  • Conical blade enters the soil in the direction of travel ahead of the spindle and moves soil laterally behind the spindle to widen the opening.
  • Heavier down pressure spring
  • Coulter swivels reducing side loading
  • All service/adjustments accomplished with 1/2″ impact wrench
  • 6″ Blade rock clearance to prevent breakage
  • Cup washers protect all seals
  • Dual roller bearing for longer life, not single row ball bearings
  • All hi tensile steel thoughout for weight reduction
  • Weight-forward design to avoid weight transfer from drawbar
  • 2 coat black enamel baked paint

Hybrid

Combination of rotary injector and disc incorporator

Features:

  • Higher GPA than conventional rotary injectors
  • Special formed 20″ diameter notched covering blades provide scooping action to move soil
  • Heavy down pressure on covering blades for more soil movement
  • Conical blades creates a wider furrow
  • Coulter blade swivels reducing side loading
  • 6″ Blade rock clearance to prevent breakage
  • Cup washers protect all seals
  • Rugged design with hi tensile steel for weight reduction
  • 2 coats black enamel baked paint

Short Mount

For Vertical Application

Features:

  • 13 Wave Conical Blade to widen slot for nutrient placement
  • Fine tune alignment of liquid with lateral adjustment to the Tube Mounting Bracket
  • Exact alignment with furrow created by the 13 Wave Conical Blade is accomplished by slotted holes in the Tube Mounting Bracket
  • Liquid is distributed close to the coulter for better alignment on contours
  • Converts to Sweep Injection with curved shank for wet or compacted soil conditions that limit gallons per acre

Sweep options

descriptionWing WidthSpeedGallons Per AcreSoil LiftVertical Shank Thickness
8 inch low rate sweep8″ Low Rate Sweep8″5-8 mph.2,500 – 5,000 gpa< 1"1/2″
8 inch high rate sweep8″ Hi Rate Sweep8″5,000 – 10,000 gpa< 1-1/4"1″
12 inch high rate sweep12″ Hi Rate Sweep12″10,000 – 15,000 gpa< 1-1/4"1″
12 inch max lift sweep12″ Max Lift Sweep12″20,000+ gpa

you might also be interested in...

VTI Tilling Units

feel free to contact us