Norwood Young America
Norwood Young America
Rockville
952-467-3100 Mon - Fri 8:00 - 5:00 301 Industrial Blvd, Norwood Young America, MN 55397
(320) 252 6272 Mon - Fri 8:00 - 5:00 24562 County Rd 138, St. Cloud, MN 56301
Lasting
Founded in 1971
Innovative
Designing & Engineering
Quality Equipment
Impervious
Building it for the Long Haul
Flow Meters

Krohne Flow meters for measuring the flow of liquid manure

Krohne

The Krohne magnetic flow meter has a teflon-pfa liner and reinforced stainless steel mesh for abrasion resistance. A remote digital readout in the tractor cab gives the operator instant reading of gallons per minute and total gallons pumped for an accurate application rates per acre. This meter can be set for gallons or liters and has a zero out button to clear out the total read out. Krohne meters are capable of being hooked up to GPS units. For extra protection have a meter head guard and cable protector installed.

Krohne’s Website

Giving you the information you need right to the tractor

Flow Meters

Krohne Flow Meters

The Krohne magnetic flow meter has a teflon-pfa liner and reinforced stainless steel mesh for abrasion resistance. A remote digital readout in the tractor cab gives the operator instant reading of gallons per minute and total gallons pumped for an accurate application rates per acre. This meter can be set for gallons or liters and has a zero out button to clear out the total read out. Krohne meters are capable of being hooked up to GPS units. For extra protection have a meter head guard and cable protector installed.

optiflux 4000

Krohne Optiflux 4000

IFC 100

Krohne IFC 100

IFC 300

Krohne IFC 300

A closer look at the Krohne Optiflux 4000

Up Close: Optiflux 4000

The OPTIFLUX 4000 design meets the demands of a very wide range of applications in industries including the chemical, pulp & paper, water and wastewater, minerals and mining, iron, steel and metals, pharmaceuticals and oil & gas industry.

The OPTIFLUX 4000 has a field proven and unsurpassed lifetime. This is assured by the fully welded construction, full bore pipe construction, absence of moving parts and wear resistant liner materials. Even for demanding applications in harsh environments or with aggressive and abrasive media KROHNE’s OPTIFLUX 4000 can offer a solution.

Examples include water injection under high pressures (2500 lbs), sub-sea installations, slurries with very high solids contents, alkaline solutions and acids, up to chemical dosing, bleaching, colouring, and black liquor in the paper industry. If required, a solution beyond our standard scope can be engineered. KROHNE has in-house specialized know-how on constructions, welding and exotic materials

Information above is from the Optiflux 4000 technical datasheet

THE BENEFITS

  • All welded rugged construction, to extend lifetime of equipment
  • Good corrosion, erosion / abrasion resistance
  • Flexibility in sizes including sizes, special constructions, special inner diameters and thicknesses

  • Corrosion resistant and leak tight electrodes. Specials (materials, retractable or pointed) on demand
  • Extensive diagnostic capabilities
  • Every meter leaving the factory is wet calibrated on our calibration rigs which are traceable

Literature

A closer look at the Krohne IFC 100

Up Close: IFC 100

The IFC 100 converter is compatible with almost any flow sensor in the OPTIFLUX and WATERFLUX range.

The signal converter supplies the current required by two field coils to generate a magnetic field. It converts the flow proportional signal voltage into digital values and filters out noise and interference signals. From the filtered signal, the flow velocity, the volume flow and the mass flow are calculated.

The IFC 100 signal converter provides a large variety of flowmeter and process diagnostic functions guaranteeing reliable measurements. Detection of deposits or coating on the electrodes, temperature and conductivity changes in the medium, gas bubbles or solids, and an empty pipe are good examples of process diagnostics functions.

Information above is from the IFC 100 technical datasheet

THE BENEFITS

  • Simple installation and start-up
  • Available inputs and outputs: Current output (incl. HART®), pulse/frequency output, status output and control input
  • Large backlit graphic display with intuitive operation
  • A variety of operating languages integrated as standard

  • Maintenance free
  • Excellent price/performance ratio
  • Extremely quick signal conversion
  • Higher accuracy by extended calibration

Literature

A closer look at the Krohne IFC 300

Up Close: IFC 300

The IFC 300 is designed to measure the flow velocity, conductivity, volume and mass flow of electrically conductive liquid media.

The signal converter can be combined with any measuring sensor, making it very widely used. In terms of available housing versions, there is a compact variant, in which the signal converter is connected to the measuring sensor, as well as the field, wall-mounted and 19″ rack-mounted housing.

The electronics plug-in module is identical, regardless of the housing version, providing the same functionality and a standardized operating concept.

Information above is from the IFC 300 technical datasheet

THE BENEFITS

  • High measuring accuracy and long-term stability : ±0.15% of measured value ± 1 mm/s
  • Superior process reliability thanks to standard integrated diagnostics: testing of device functions, check for compliance with specifications and application testing
  • Available inputs and outputs: Current output (incl. HART®), pulse/frequency output, status output, control input and current input
  • Suitable for both partially filled and fully filled pipelines

  • Approved for custody transfer according to OIML R 49 and R 117-1, MI-001 and MI-005 (optional)
  • Integrated temperature and conductivity measurement
  • Optionally available virtual reference offers cost savings and increased process reliability as grounding electrodes and rings are no longer needed

Literature

you might also be interested in...

feel free to contact us